Werkzeugmaschine - Funkenerosion (EDM)

Funkenerosionsbearbeitung (EDM)

EDM involves the direction of high-frequency electrical spark discharges from a graphite or soft metal tool, which serves as an electrode, to disintegrate electrically conductive materials such as hardened steel or carbide. The electrode and workpiece are immersed in a dielectric liquid, and a feed mechanism maintains a spark gap of from 0.0005 to 0.020 inch (0.013 to 0.5 millimetre) between the electrode and the workpiece. As spark discharges melt or vaporize small particles of the workpiece, the particles are flushed away, and the electrode advances. The process is accurate, but slow, and is used for machining dies, molds, holes, slots, and cavities of almost any desired shape. In CNC wire machining, a thin copper wire is used as the tool for cutting out two- and three-dimensional fretwork profiles.

Elektrochemische Bearbeitung (ECM)

ECM ähnelt der umgekehrten Galvanisierung. Bei diesem Verfahren wird Metall von einem Werkstück mit Gleichstrom mit einer kontrollierten Geschwindigkeit in einem gelöstelectrolytic cell. The workpiece serves as the anode and is separated by a gap of 0.001 to 0.030 inch (0.025 to 0.75 millimetre) from the tool, which serves as the cathode. The electrolyte, usually an aqueous salt solution, is pumped under pressure through the inter-electrode gap, thus flushing away metal dissolved from the workpiece. As one electrode moves toward the other to maintain a constant gap, the anode workpiece is machined into a complementary shape. The advantages of ECM are lack of tool wear and the fact that a softer cathode tool can be used to machine a harder workpiece. Applications of ECM can be found in the aircraft engine and automobile industries, where the process is used for deburring, drilling small holes, and machining extremely hard turbine blades.

Andere Versionen von ECM umfassen elektrolytisches Schleifen, das etwa 90 Prozent ECM mit 10 Prozent mechanischer Wirkung umfasst; elektrochemische Lichtbogenbearbeitung (ECAM), bei der kontrollierte Lichtbögen in einem wässrigen Elektrolyten Material mit hoher Geschwindigkeit entfernen; und Kapillarbohrungen, bei denen saure Elektrolyte verwendet werden, um sehr feine Löcher zu bearbeiten.

Ionenstrahlbearbeitung (IBM)

In IBM a stream of charged atoms (ions) of an inert gas, such as argon, is accelerated in a vacuum by high energies and directed toward a solid workpiece. The beam removes atoms from the workpiece by transferring energy and momentum to atoms on the surface of the object. When an atom strikes a cluster of atoms on the workpiece, it dislodges between 0.1 and 10 atoms from the workpiece material. IBM permits the accurate machining of virtually any material and is used in the semiconductor industry and in the manufacture of aspheric lenses. The technique is also used for texturing surfaces to enhance bonding, for producing atomically clean surfaces on devices such as laser mirrors, and for modifying the thickness of thin films and membranes.

Laser machining (LM)

LM is a method of cutting metal or refractory materials by melting and vaporizing the material with an intense beam of light from a laser. Drilling by laser, although costly in energy since material must be melted and vaporized to be removed, is used to cut small holes (0.005 to 0.05 inch [0.13 to 1.3 millimetres]) in materials that are too difficult to machine by traditional methods. A common application is the laser drilling of diamonds to be used as dies for drawing wire. Lasers also are used to drill and cut ceramics and substrates for integrated circuits; the aircraft industry uses CNC-controlled lasers to cut profiles and to drill holes in engine parts.

Plasma arc machining (PAM)

PAM is a method of cutting metal with a Plasma-Lichtbogen- oder Wolfram-Inertgas-Lichtbogenbrenner. Der Brenner erzeugt einen Hochgeschwindigkeitsstrahl aus hochtemperaturionisiertem Gas (Plasma), der durch Schmelzen und Verdrängen von Material vom Werkstück schneidet. Die in der Plasmazone erreichbaren Temperaturen reichen von 11.000 bis 28.000 ° C (20.000 bis 50.000 ° F). Das Verfahren kann zum Schneiden der meisten Metalle verwendet werden, einschließlich solcher, die mit einem Oxyacetylenbrenner nicht effizient geschnitten werden können. Bei Hochleistungsbrennern wurden Aluminiumlegierungen mit einer Dicke von bis zu 15 Zentimetern und Edelstahl mit einer Dicke von bis zu 10 Zentimetern nach dem PAM-Verfahren geschnitten. Das Verfahren wird zum Profilschneiden von Flachblechen, zum Schneiden von Nuten in Edelstahl und auf Drehmaschinen zum Drehen großer, gehärteter Stahlwalzen verwendet.

Andere Methoden von Bearbeitung

Ultraschallbearbeitung (USM)

In USM, material is removed from a workpiece with particles of abrasive that vibrate at high frequency in a water slurry circulating through a narrow gap between a vibrating tool and the workpiece. The tool, shaped like the cavity to be produced, oscillates at an amplitude of about 0.0005 to 0.0025 inch (0.013 to 0.062 millimetre) at 19,000 to 40,000 hertz (cycles per second). The tool vibrates the abrasive grains against the surface of the workpiece, thus removing material. Ultrasonic machining is used primarily for cutting hard, brittle materials that may be conductors of electricity or insulators. Other common applications of USM include cutting semiconductor materials (such as germanium), engraving, drilling fine holes in glass, and machining ceramics and precious stones.

A modified version of the process is ultrasonic twist drilling, in which an ultrasonic tool is rotated against a workpiece without an abrasive slurry. Holes as small as 80 micrometres have been drilled by this type of USM.

Chemical machining (CHM)

This nonelectrical process removes metal from selected or overall areas by controlled chemical action. Masking tape can be used to protect areas not to be removed. The method is related to the process used for making metal printing and engraving plates. Two types of chemical machining processes include chemical blanking, which is used for cutting blanks of thin metal parts, and chemical milling, which is used for removing metal from selected or overall areas of metal parts.

Photochemical machining (PCM)

PCM is an extension of CHM that uses a series of photographic and chemical etching techniques to produce components and devices in a wide range of metals, especially stainless steel.

Water-jet machining

In the water-jet machining process, water is forced through tiny nozzles under very high pressures to cut through materials such as polymers, brick, and paper. Water-jet machining has several advantages over other methods: it generates no heat, the workpiece does not deform during machining, the process can be initiated anywhere on the workpiece, no premachining preparation is needed, and few burrs form during the process. An abrasive is occasionally added to the water to improve the rate of material removal, especially in finishing work. The offshore industry uses seawater as the working fluid when applying this technique.